Welcome to Buyer’s Guide!
Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.
Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.
Check Today Price
Top Of The Best Halogen Bulbs Reviewed In 2018Last Updated November 1, 2018
№1 – (Pack Of 10) MR16 20W 12V GU5.3 Base Halogen bulb Flood 2000Hr Life 2950K Warm White MR16 Halogen Light Bulb
№2 – G4 Halogen Light Bulbs, 20W Bin-Pin(2pin)12 Volts JC Type,Clear bulb(Pack of 10)
№3 – Triangle Bulbs T10293-6 (6 pack) – 50 Watt, GU10 Base, 120 Volt, MR16 With UV Glass Cover, Halogen Flood Light Bulb, Q50MR16/FL/GU10, 6 Pack
Headlight Bulb Light Output Color
Headlight bulb manufacturers tend to charge more for bulbs that are brighter and whiter. Brighter bulbs with higher light output, and a higher color temperature tend to cost more, so if this is important to you, be prepared to spend a little more.
Also, halogen headlight bulbs that claim to be whiter and brighter also tend to burn out quicker. Manufacturers are able to provide more light output, but that additional intensity burns them out at a faster rate than a normal headlight bulb.
The way that manufacturers accomplish this is by coating the outside of the bulb glass with a semi-transparent film. In most cases this is a blue film. As the light passes through the glass/film, it changes the color of the light, just as if you were looking through tinted sunglasses.
The problem with this is as soon as there is any film or coating on the glass, you lose light output. You may get the color you want, but you might not be able so see very well at night. So as you are shopping around, keep this in mind.
After lumens, the next concept you’ll want to understand is color temperature. Measured on the Kelvin scale, color temperature isn’t really a measure of heat. Instead, it’s a measure of the color that a light source produces, ranging from yellow on the low end of the scale to bluish on the high end, with whitish light in the middle.
An easy way to keep track of color temperature is to think of a flame: it starts out yellow and orange, but when it gets really hot, it turns blue. You could also think of color temperature in terms of the sun — low, yellowy color temperatures mimic the tone of light at sunrise or sunset, while hotter, more bluish-white color temperatures are more akin to daylight (sure enough, bulbs with color temperatures like these are commonly called “daylight” bulbs). This is also why a lot of people prefer high color temperatures during the day and lower color temperatures in the morning and evening.
Generally speaking, incandescents sit at the bottom of the scale with their yellow light, while CFLs and LEDs have long been thought to tend toward the high, bluish end of the spectrum. This has been a steady complaint about new lighting alternatives, as many people prefer the warm, familiar, low color temperature of incandescents. Manufacturers are listening, though, and in this case they heard consumers loud and clear, with more and more low-color-temperature CFL and LED options hitting the shelves. Don’t believe me? Take another look at those two paper lamps in the picture above, because they’re both CFL bulbs — from the same manufacturer, no less.
Sylvania often color codes its packaging. Blue indicates a hot, bluish color temperature, while the lighter shade indicates a white, more neutral light.
As you’re probably aware, light bulbs come in a fairly wide variety of shapes. Sure, it’s easy enough to tell a hardware store clerk that you want “one of those flamey-looking lights,” or “just a normal ol’ bulby light bulb,” but knowing the actual nomenclature might save you some time.
Are pricey candelabra LEDs a smart upgrade for your chandelier?
Let’s start with the base of the bulb, the part that screws in. In the US, the most common shape by far is E26, with the “E” standing for Edison and the “26” referring to the diameter of the base in millimeters. You might also see E2bulbs from time to time, which is the European standard. Those should still fit into common American fixtures, but keep in mind that voltage ratings are different in the two regions, with American bulbs rated for 120 volts compared to 220-240 volts in Europe. For smaller sockets, like you might find with a candelabra, you’ll want to look for an E1base.
As for the bulb itself, the typical shape that you’re probably used to is an A1bulb. Increase that number to A2or A23, and you’ve got the same shape, but bigger. Bulbs made to resemble flames are F-shaped, which is easy enough to remember, as are globes, which go by the letter G. If it’s a floodlight you want, you’ll want to look for “BR” (bulging reflector) or “PAR” (parabolic aluminized reflector). Those bulbs are designed to throw all their light in one direction only, which makes them useful for spot lighting, overhead lighting and the headlights in your car.
Your automated-lighting options
It used to be that if you wanted your lights to turn on and off automatically, then you had to rely on a cheap wall socket timer, the kind you might use to control a Christmas tree. These days, with a modest boom in smart lighting currently under way, it’s easier than ever to dive into the sort of advanced automation controls that can make any home feel modern and futuristic. Use the right devices, and you’ll be able to control your lights in all sorts of creative ways, and make your life a little bit easier in the process.
The most obvious way to get started with smart lighting is with the bulbs themselves. You’ve got plenty of intelligent options from brands both big and small, and to find the one that’s best for you, you’re going to need to understand what sets them apart.
Connect with these 3IFTTT-friendly smart devices (pictures)
The first thing to look at is how the bulbs communicate with you. Some offer direct connections with your smart phone via Bluetooth or Wi-Fi, which makes setup as simple as screwing the thing in and following in-app pairing instructions.
Others transmit using a distinct frequency like ZigBee or Z-Wave. Bulbs like those might be a better fit for bigger smart home setups, as it’s typically a little easier to sync them up with things like motion detectors and smart locks. Setup can be slightly more advanced, as you’ll need a separate hub or gateway device capable of translating that distinct frequency into a Wi-Fi signal your router can comprehend.
Some smart bulbs come with their own gateway. Others, like the Cree Connected LED, require a third-party control device, like the Wink Hub.
If you’re looking for a little more color in your life, then be sure and take a look at a product like the Philips Hue Starter Kit. Aside from being fully automatable via a mobile app and control hub, the Hue LED bulbs are capable of on-demand color changes. Just pull out your phone, select one of millions of possible shades, and the light will match it. And if you’re into voice control, Hue bulbs hit the compatibility trifecta — they’ll work with Siri, Alexa, and the Google Assistant.
Because Philips opened its lighting controls to third-party developers, you’ll also find lots of fun novelty uses for Hue bulbs, like changing the color of your lights in rhythm with whatever music you’re playing. There’s even an app that’ll sync your Hue lights up with certain TV programming.
Hue lights are also directly compatible with the popular web service IFTTT, with recipes already available that will change the color of your lights to match the weather, or to signal a touchdown from your favorite football team, or even to indicate when your stocks are doing well.
Pros & Cons of LED Light
LED stands for light emitting diode, which are semiconductors that produce light when charged. LED bulbs have an average lifespan of over 50,000 hours, compared to a little over 1,000 for conventional incandescent bulbs. As a LED ages, the amount of light it gives off dissipates over time.
Pros & Cons of CFL Light
CFL stands for compact fluorescent lighting, which is simply a smaller version of a fluorescent tube. CFL bulbs contain a mercury vapor that lights when it is energized. Because CFLs contain mercury, they must be disposed of carefully, at designated drop-off site (Home Depot, Lowes, recycling centers, etc). An average CFL bulb should last 7,000 hours.
Pros & Cons of Incandescent Light
Incandescent light is an electric process that produces light with a wire filament that is heated to a high temperature by an electric current which runs through it. This is the type of lighting which was the standard in homes up until the 1990’s. Due to its poor energy efficiency, it is being replaced with the newer technology of LED and CFL bulbs. Incandescent bulbs last roughly 1,000 hours.
Pros & Cons of Halogen Light
Similar to incandescent light bulbs, halogen bulbs use a similar electric-filament technology with one important difference; with incandescents the filament degrades via evaporation over time whereas, with halogens, filament evaporation is prevented by a chemical process that redeposits metal vapor onto the filament, thereby extending its life. Halogen bulbs have a lifespan of roughly 3,000 hours.
Color Temperature & Lighting Color temperature is a characteristic of visible light. The temperature of light refers to its warmness or coolness, or hue. This temperature is measured using the Kelvin scale, which for most use ranges from 2,700°-7,500°K. Incandescent and halogen lighting are the most limited in the temperature range at 2,700°-3,000°K. LED and CFL have each expanded their color range to now offering warmer options. Most task lighting, however, benefits from cooler lighting options which include LED, full spectrum, and CFL.
Understanding Lumens & Brightness is a measurement of light output from a lamp, often called a tube or a bulb. All lamps are rated in lumens. For example, a 100-watt incandescent lamp produces about 1,600 lumens.
The distribution of light on a flat surface is called its illumination and is measured in footcandles. A footcandle of illumination is a lumen of light spread over a one square foot area.
The illumination needed varies according to the difficulty of a visual task. Ideal illumination is the minimum footcandles necessary to allow you to perform a task comfortably and efficiently without eyestrain or fatigue. According to the Illuminating Engineering Society, illumination of 30 to 50 footcandles is needed for most home and office work. Intricate and lengthy visual tasks — like sewing — require 200 to 500 footcandles.
1,000-1,400 Lumens is a commonly accepted range for most applications of task lighting. An average of 50 Lumens per square foot is a common measure. efficacy. Efficacy is the ratio of light output from a lamp to the electric power it uses and is measured in lumens per watt.
Demystifying LED Light
When comparing the raw lumen output of traditional lamps with the lumen output of many LED lamps, it may seem that LEDs deliver less light than the conventional counterparts. These comparisons, however, are inaccurate and misleading, since they fail to account for the amount of wasted light in conventional lighting.
Therefore, lumen output is a poor measure of the suitability of a lamp for a given task. The better measure is delivered light — how much light a fixture delivers to a surface, as measured in lux (lx) or footcandles (fc). You can make comparisons between conventional and LED lighting fixtures on the basis of delivered light, as it measures how much of a light source’s raw lumen output reaches a surface or area you are lighting.
Determining the amount of a conventional lamp’s raw lumen output reaches as area, you must discount any light lost in the fixture housing (at times over 30%), as well as the light lost as a result of shading, lensing, and filtering. Since incandescent and fluorescent lamps often emit light in many directions, you must also discount any light cast away from the target area.
Reading area or den
The reading area should have a bright task lamp. A bright desk lamp can prevent eye strain which is helpful in preventing eye damage in the long run. With bright task lamps in the reading area, you can keep headaches away. Thus, you will surely enjoy reading as well as other activities like writing letters or completing puzzles.
Your kitchen is another part of the home that requires task lighting. The dangerous nature of the activities you do in your kitchen is reason enough to get additional task lighting. More importantly, you need enough light to read recipes and to see the ingredients as they cook as well as other practical things. For kitchens, common task lighting fixtures are under cabinet lights that provide extra illumination to supplement the ambient light.
OPTLED Headlight Bulb
With more than two decades of experience in the lighting industry, the manufacturer made sure that this H1bulb is integrated with top-of-the-line features, providing you with the guarantee that it can deliver unmatched performance.
Amongst its many features, one of the most impressive is the Arc Glass Technology, which gives it a distinct advantage above its competitors. The latter is an exclusive technology, which allows the light to create a high-density pattern to prevent the presence of dark spots.
Another innovative feature that is equally commendable in this product is the Dual Speed Turbo Cool Fan, which is incorporated in its Flux Beam. This is able to provide the flow rate that is two times better than what you can expect from most of the alternatives.
The Red Line Control Driver is also exceptional, which acts as the brain and heart of the light bulb. It is designed with an ultra-efficient chip that can control different functions of the light. It also helps to improve heat protection and optimize light output.
Sylvania H1Silver Star Ultra High Performance Halogen Light Bulb
Sylvania has gained reputation as one of the best in the market, and this product is a testament to the global reputation that the company was able to build. They have a world-class manufacturing plant, which is equipped with the latest technologies that allow them to produce high-quality H1bulbs.
Form their product line, this is the brightest down road headlight. Such feat is made possible because of the use of highly-engineered filament, which is complemented with exclusive halogen gas mixture. To add, it also utilizes cobalt blue nano-coating technology, which is another innovation that makes it outdo the performance of many others within the competition.
It is also a good thing that the H1bulb complies with all of the legal standards that have been set, specifically in the United States. This means that it is legal to be used and most of all, its performance has been tried and tested. This should be more than enough to provide you with the confidence that you will not have any regrets in choosing it above all others.
LED Import USA LED Cree Headlight Bulbs
This is an H1bulb that is meant for the outdoors. It can greatly complement your adventurous spirit, which is basically because of its ability to resist external elements. It is waterproof. In addition, the fan can work optimally even if it is subjected to extreme weather conditions.
Heat control is one more thing that makes this a great option. Aside from the dual stage cooling fan, it is also integrated with cool charged driver. With these features, you can expect that it won’t be prone to overheating and with such, the specifications state that it can be functional for more than 50,000 hours.
Looking for H1bulbs that will be effortless for you to install? You have another good reason to take this into consideration. It is designed to fit in 90% of CANBUS vehicles. In fact, as many others would prove, its installation can be accomplished even in as short as 20 minutes. The best thing is that you can do it on your own! Just follow the detailed instructions that have been provided by the manufacturer.
4. Philips H1Crystal Vision Ultra Upgrade Headlight Bulb
Philips has more than a century of experience in manufacturing light bulbs, which is sufficient reason for you to believe that this is indeed a good choice. It has passed the requirements of the Department of Transportation, which means that it is street-legal.
It is advertised as a 4000K bright white light, which makes it a promising option. This will provide you with optimal white light that you need on the road. There are some, however, who noted that its brightness does not really seem to be as advertised.
One good thing about this model is the blue cap that is integrated on the top of the bulb. The latter will provide a cool blue effect, which will make the light warmer, especially when you are driving during daytime.
This is one product that we can highly recommend to budget-conscious buyers. In spite of the fact that it is made by a trusted brand and even if it has impressive features, the price tag will surely not hurt your wallet.
Since it has been launched in the 1960s, it became one of the most popular choices when it comes to H1light bulbs. They are cheap and simple, with most being able to offer a lifespan of up to 1,000 hours. However, one of the problems with this type is that while it creates bright light, it can also generate heat. It can also be contaminated by various substances and is quite fragile, making it important to handle such with care.
The efficiency that is produced by this type of bulb is commendable. It is made from composites of gases and rare metals. They can last more than 2,000 hours and while they can produce exceptional brightness, the power consumption is minimal, usually only 3watts. However, it has the potential to create a bright glare, which makes it a potential disturbance in traffic. It is also expensive and the system is more complex.
This is an excellent choice amongst designers because of its size. With its thinness, it can be easily shaped in different forms. Its brightness may not be comparable to HID, but within only a few seconds, it will be able to achieve its optimal brightness. Its biggest benefit, however, will be its energy-efficiency. In fact, many houses today, and even TVs use LED lighting because of its minimal power consumption. Its high cost, however, can be a significant drawback for many people.
When choosing the best H1bulb, the following are some of the most important things that should be taken into consideration:
Ease of Installation
The good news is that H1bulbs can be installed even on your own. You do not need the help of a mechanic nor do you need to be a pro. You just have to make sure that it is easy to install. The manufacturer must be able to provide comprehensive instructions, allowing you to complete the job easily. In addition, make sure that you do not hold the bulb as this can break.
For sure, you would want to be provided with the best bang for the buck. With this, make sure to choose one that is going to be long-lasting. More often than not, the manufacturer will state the lifespan of their H1bulbs based on the number of hours. See to it that it will be good for tens of thousands of hours.
The main purpose of H1bulbs is to provide the illumination that you need on the road. With this, it is important to make sure that it is bright enough so that it can function as expected. Nonetheless, there are some that can be too bright, which can be blinding to the other driver. See to it that the brightness is just enough. You also have to pick one that is street-legal, which means that you are allowed to use it.
To help you decide on which one should be chosen, it would be best to gather feedbacks from other people. Take a look at what they have to say, and for sure, it will be easier for you to reach a decision. Some are generous enough to relay their real-life experiences, which will help you to evaluate the pros and cons of the alternatives.
Incandescent bulbs: These inexpensive bulbs are probably what you’ve been buying for years, but they’re about to undergo some changes. Forget buying a 100-watt incandescent bulb—they’re being phased out for environmental reasons. While consumers can still purchase incandescent bulbs, federal law requires that they be produced using 30 percent less energy. They’ll emit the same warm light, but even with the federally required changes, these bulbs will still use more energy than some of their greener counterparts.
Compact fluorescent lightbulbs (CFLs): These bulbs are good for the environment and your wallet: They often last to times longer than incandescent bulbs, and experts say they use 7percent less energy. These bulbs generally cost more up front, but you can break even quickly, thanks to the energy savings. The major downsides: You can’t use them with dimmers, and they take a few seconds to power on. And while they contain a very small amount of mercury, it’s sealed in glass tubing so it’s not released if the bulb is broken. Manufacturers are working to improve these bulbs; for example, they no longer emit an annoying buzzing sound and they’re available in different colors, like cool, neutral, or warm. These bulbs are particularly effective when used in places where the lights are left on often, like a hallway, porch, or kitchen.
Things to Consider
Make sure that you don’t choose a lightbulb with a higher wattage than your lamp allows. It can be tricky with the lower wattages to know what is the right wattage in CFLs or halogens. Energy Star has very helpful charts to help you figure out what bulb is best for you.
If you’re choosing a lightbulb for outdoors, make sure that it’s in a fixture that protects it from getting wet. Many CFLs and LEDs can be used outside, but they can’t get wet.
LED vs. CFL vs. Halogen
Now that most incandescent lightbulbs are pretty much a thing of the past, consumers now must choose between LED (light-emitting diode), CFL (compact fluorescent), and halogen bulbs to light their homes. But which is the best option? It all depends on your needs. We’ll take you through the various kinds of lighting, and the benefits that each offers.
LEDs vs. Incandescent Bulbs
Traditional incandescent bulbs measured their brightness in watts; if you wanted a brighter bulb, you bought one with a higher wattage. However, with the advent of LEDs and other types of lighting, that yardstick has become meaningless, and as a result, a bulb’s brightness is now listed as lumens, which is a more accurate measurement of how bright it is, rather than how much energy it consumes. Below is a conversion table which shows how much energy, in watts, an incandescent bulb and an LED typically require to produce the same amount of light.
Other Lightbulb Alternatives
EISA will also stop the manufacturing of candle-and globe-shaped 60-watt incandescent bulbs (the types used in chandeliers and bathroom vanity light fixtures). However, the law doesn’t affect 40-watt versions of those bulbs, nor three-way (50 to 100 to 150-watt) incandescent A1bulbs. So, those will continue to be an option for you, as well, in fixtures that will accommodate them.
LED Lightbulb Options
Traditional bulbs for table and floor lamps are known by their lighting industry style name “A19,”while floodlight bulbs made for track lights and in-ceiling fixtures are dubbed “BR30.” Your best long-term alternative to either style is extremely energy-efficient LED technology.
The LED equivalent of a 60-watt A1bulb consumes only between and 1watts, and provides about the same light output, measured in lumens. A 40-watt equivalent LED bulb consumes only to 8.watts. And a 65-watt BR30 (floodlight) replacement LED bulb consumes only to 1watts.
Moreover, an LED bulb’s lifespan is practically infinite. Manufacturers typically estimate a bulb’s lifespan based on three hours of use per day. By that measurement, an LED bulb will be as good as new for at least a decade, manufacturers say. Under the same conditions, an old-fashioned lightbulb may work for only about a year before burning out.
For example, GE’s equivalent LED bulb has a rated lifetime of 15,000 hours or 13.years. Philips’ equivalent LED bulb has a rated lifetime of 10,000 hours or 9.1years.
LED bulbs will continue to light up even after their rated lifetimes expire; however, brightness may drop or the color cast of the light may change.
GE, Philips, Sylvania, Cree and other brands (including IKEA) all offer LED bulbs that output the most popular “soft white” light, at retailers including Home Depot, Target and Walmart. In addition, GE ‘s Reveal lineup of color-enhancing lightbulbs (a coating filters out yellow tones to enhance colors lit by the bulb) with LED replacements equivalent to 40-watt and 60-watt A1bulbs and to a 65-watt BR30 bulb.
IKEA Tradfri Gateway Kit
Even IKEA is getting into the smart lighting game. Its Tradfri line includes several bulb types, including an A2(essentially an A19), GU10, as well as a remote control, dimming switch, and a motion sensor. These bulbs also require a gateway hub to connect to your smartphone via Wi-Fi. While they currently do not work with any other smart home system, Ikea announced that the lights will work with Alexa, Google Home, and HomeKit by the fall. Not all of the Tradfri lights are available online, so you’ll have to go to an IKEA store for some; be sure to stock up on Swedish meatballs while you’re there.
The most recognisable type of bulb, and the easiest to replace. Let’s say you have a standard 60W incandescent bulb which you use to light your lounge and replace it with a 12W Verbatim LED bulb. This is overkill, if anything, as the replacement will be noticeably brighter (producing 1,100 lumens – the equivalent of a 77W incandescent bulb and representing 8percent energy saving).
Using some average figures – 15p per kWh of electricity – you’ll save around £per year.
They’re said to last for 25,000 hours – the same as the Verbatim – and you’ll break even in roughly two years.
There are various types of incandescent bulb. The common version – in the photo above – is an E2screw, but it can also have a traditional bayonet fitting. Most LED bulbs offer a choice of either fitting.
You may also have R50 spotlight bulbs (also known as SES or E14) in ceiling light fittings. These are fairly widely available as LED versions.
However, using the same SES / E1screw fitting are many ‘candle’ bulbs. Again, these are easily available in LED.
All of these are inefficient and can be replaced with LEDs. Halogen spotlights are perhaps the worst culprits as although they use less power than incandescent bulbs, they’re rarely used singly. Typically there will be up to six or eight per room, and if each is a 35W lamp, that’s between 200 and 300W. Halogens are notoriously inefficient, such that you can buy ‘energy-efficient’ halogen bulbs, but even these save only around a third.
Halogens come in two main types: GU(mains voltage) and MR1(low voltage – 12V). Just because some are low voltage doesn’t mean they use less power. They don’t.
Don’t forget your outdoor lighting. Halogen floodlights – which have lamps which consume between 120 and 500 watts – can be replaced with 10- or 20W LED versions for around £to £20 per light: you replace the entire light fitting. This 10W model costs only £9.9from Toolstation.
Colour temperature is crucial: most people prefer the warm white, which is very similar to halogen, rather than the ‘cold’ bluish tint of white or cool-white LEDs. Look out for the actual colour temperature in Kelvin: 2700-3000K is a good warm white. Higher values, say 5000K or 6000K will look cooler. If you want a whiter look, be careful as you can end up with a very clinical look.
You also need to look at brightness, measured in lumens. Try to find out how many lumens your current halogen lamps produce, and match or exceed that. Some cheap LED bulbs produce as little as 120lm, but you’ll probably find you need 350-400lm to provide the same light output as your existing bulbs.
Next up is beam angle. This determines the spread of light the bulb produces. A narrower angle means light will be concentrated on a smaller area, like a spotlight. A larger angle is better for lighting a larger area, but don’t forget this means it could appear dimmer overall. For replacing Halogen downlights, look for a beam angle of around 40 degrees. Incadescent replacements should have a much larger beam angle, say 140 degrees.
CRI is another spec you should see (if you don’t, it’s worth asking for the CRI figure). Here’s why: CRI stands for Colour Rendering Index and is a measure of the light quality from 0 to 100. In other words, the CRI score tells you if objects appear the correct colour when lit using that bulb. Incandescent bulbs had a brilliant CRI, but not so with fluorescent tubes. If you want to avoid bad-looking lighting, it’s crucial to go for LEDs with a high CRI.
Not all LEDs use the same technology. Cheaper bulbs will tend to use multiple SMD (surface-mount device) LEDs, but newer or more expensive ones will use COB – chip on-board LEDs.
COB offers a higher light output per watt, and tends to be used in smaller bulbs such as MR1COB isn’t necessarily better than SMD, though. It depends on the form factor of the bulbs you’re buying and your priorities in terms of budget.
If you are replacing low-voltage halogen bulbs, there are no guarantees that LEDs will work on your particular transformers which may require a minimum power draw to work properly. If the draw is too low from your super-efficient LED bulbs, they may flicker or not work at all. In this case, you would need to either replace the transformers with proper LED drivers, or change the fittings from MR1to mains-voltage GUfittings and buy GULED bulbs instead. Fittings are cheap, and it may be cheaper to go down this route than buy an LED driver for each MR1bulb.
The LED Headlights Era
There are plenty of cars that are using headlight lighting these days mainly because they have recently became a trend among car owners. LEDs don’t produce much heat compared to other types of lighting and cannot ruin the housing of headlights.
They also easily light up which makes them an easy pick for drivers. In comparison to Halogen and Xenon headlights, LED lights can easily cut through where they shine which is why a lot of people are in favor of using them.
While they are popular to many people there aren’t much LED headlight kits sold in the market and the ones available are almost the same which is why they are harder to figure out as to which one is the best. But as promised, we will help you get the best led headlights and in this article we will give you the top five led headlights that you need to check out in the market today.
Top Best LED Headlight Bulbs To Buy With Their Reviews
Now if you are looking for the best LED headlight bulbs then these are the names that you should check out. These are also listed according to the star ratings that customers gave:
This wonderful LED bulb is among the best sellers in the market today. The OPTis made with crystal clear 6000K white light without any dark spots to begin with.
It has FluxBeam LED that uses only the best CREE MK-R LED and Arc Beam technology that emits the best beam pattern of light. It also has improved MHC that controls heat along with RedLine Driver and TurboCool fans that ensures your light does not overheat.
It is design to be long lasting as well with 50000 hours of continuous light so you definitely get your money’s worth. The cool thing about this light is that it also works underwater so even when you take this and use it as an underwater flashlight, you can be sure that it will work.
Installing this product is not a problem; in fact, you can do this within 20 minutes tops. In addition to that, this LED is CanBus ready so it works with all types of vehicle CPU. You also get years warranty, enough to give you time to use the product and see if it works well for your lighting needs.
Kensun New Technology All-in-One LED Headlight
Another excellent product in our list comes from Kensun. This LED light is made to be used easily, in fact, all you need to do is plug it in and turn it on. You don’t need to deal with messy wirings as this is one of the easiest bulbs to install.
This LED bulb also comes with an aluminum carry case and a pair of Hdual-beams that enhances the performance of this light bulb. It has 500m range and a lifespan of 30000 hours. It is designed to be waterproof as well and is highly protected from heat, thanks to its cooling chip and fan that helps in dispersing heat.
SNGL Super Bright LED Headlight Bulbs
Known to be one of the brightest LED headlight in the market today, Super Bright uses LUMILEDS LUXEON MZ LED which makes their lights shine brighter compared to other LED bulbs.
This bulb is made with adjustable focus length patent technology so you know that it emits the right beam pattern reach according to the International Light Distribution requirement it needs. It is also made to be free of dark sports or foggy lint so it can be bright as it can be.
It also has anti-glare features so oncoming drivers are not blinded by your lights. This bulb is also CanBus ready and can be installed in a matter of minutes. All you have to do is plug it in and turn it on. It comes with Dual IC control driver and Turbo Cool fan so your lights don’t overheat.
The lights on this page produce relatively high amounts of visible red and invisible near infrared A (NIR) and have low blue and UV output. Blue and UV wavelengths act to oppose some of the biological effects of red and NIR, light sources with peaks in these regions, such as CFL and many fluorescents should be avoided. Below are some good resources on the topic.
Red NIR on EM Spectrum
Red light and the sleep quality and endurance performance of Chinese female basketball players.
Wavelength output curves of light sources on Kelvin scale.
These incandescent and heat bulbs use E2size screw,the clamp lamp fitting is E27, these are almost always interchangeable. Fittings for these bulbs should be suitably designed for high temperatures at this wattage, even when not using specifically designed heat bulbs. Fittings should have reflectors to focus light where it is needed, some bulbs (heat bulbs generally) also have their own internal reflectors. Where possible I would choose to pair 3-Bulbrite Clear 250W Heat Reflector Light (or equivalent) with 250 Watt Clamp Lamp or above. If purchasing from a different country pay attention to the voltages as there are different requirements. The tripod sets will be easier to set up unless you have somewhere suitable to clamp the clamp lamps.
These clamp lamps are likely suitable for the above bulbs, along with other 250W or lower wattage heat and incandescent bulbs. (If choosing 300W bulbs make sure the clamp lamps are 300W suitable)
Designers Edge L14SLED 1000-Watt Twin-Head Adjustable Work Light with Telescoping Tripod Stand, Halogen
1000-Watt Twin-Head Halogen Adjustable Work Light with Telescoping Tripod Stand
2x 500-watt halogen light bulbs (1000-watts total)
How we tested them
We tested eight Hlamps at Philips’ light tunnel in Germany. The beam was measured at two points 50 metres in front of the car and at 7metres on the kerb.
We doubled the 75-metre reading and added the 50-metre results to form a beam rating. Price played a tiny role in our ranking, which was the average of two bulbs’ results.
Be it the halogen bulb or be it the HID lamps, you need electricity to get them operational, which means they have a wattage associated with them. Simply put, the higher the wattage, more will be its intensity. A standard halogen bulb fitted car will have 5watts and so you will need to replace it with a 5watt bulb only.
If you decide to go higher, like a 120-150 watt bulb, you need a relay to supply the power, as higher watt means more strain on the car’s electrical system, that can overheat the wires and hence cause damage. A standard HID bulb, on the other hand, runs at around 3watts. It is not advised to increase the wattage in a HID system as it can easily blind the oncoming traffic. There is a restriction on the maximum wattage for your headlights in some countries.
Light bulb technology
There are three types of light bulb currently available: LED are the most efficient, followed by CFL and then halogen.
Halogen bulbs are being phased out from September 2016, starting with directional bulbs (spotlights) and followed by non-directional bulbs in 2018.
LEDs have a much longer lifespan than other bulbs and are now more affordable, but they are less suited to dimmers. It’s worth checking if the bulb is dimmable before purchasing.
Dining room lighting
Pendant lights shine light down onto the table, drawing attention to the main focus of the room. Lights hung in a cluster or a chandelier fitting can really make an impact in your dining area.
Additional floor lamps or wall lights are ideal for entertaining as they provide softer, atmospheric lighting.
A ceiling light provides bright lighting for the whole room while desk lamps or positioned spotlights offer directional light for reading and studying.
Consider an illuminated mirror for applying make-up, these mimic natural light for application accuracy.
Use spotlights to illuminate the inside of a wardrobe to make it easier to see into a dark space.
Children’s bedroom lighting
This lighting should be bright and functional for playing. Celling lights provide good general lighting while table lamps or night lights offer a softer glow in the evening.
A desk lamp is an ideal choice for homework and studying.
Many of our table lamps have a fully encased light bulb to prevent little fingers from touching the hot surface.
Bathroom lights require additional protection from water and moisture, this is indicated by an IP (ingress protection) rating. All bathroom lights need a minimum IP4rating to comply with British wiring regulations.
Bathrooms have three safety ‘zones’ – 0, and These zones are identified by their likely contact with water and determine what type of light you can use in that area.
Only light fittings with a suitable IP rating can be used in a specific zone. Argos’ bathroom lights should only be used in zones and in the bathroom, but can also be used in other areas of the house too.
Zone 0: the inside of the bath or shower (IP6and 12V SELV recommended)
Zone 1: the area directly around the bath or shower, up to a height of 2.25m above the floor and at a radius of 1.2m from the water outlet (IP6recommended)
Zone 2: 60cm wide and covers areas next to and around zone 1(IP4recommended)
The light switch should be a pull cord inside the bathroom or a regular light switch outside.
You’ll need a good level of light from ceiling lights for food preparation and cooking in the kitchen area.
Light fittings which have moveable spotlights allow you to angle light on areas which need additional illumination, such as a worktop, sink or oven. Under cabinet spotlights can also provide extra light for tasks like chopping.
Kitchen areas are also subject to lighting safety ‘zone’ legislation but this is only applicable to the area directly above the sink. This is classified as zone and therefore an IP rating of 4is required.
Table, floor and pendant lights usually always require a lamp shade and this is where you can experiment with colour, pattern or texture. Along with traditional fabric shades, glass, metal and natural fibres like wicker are stylish choices.
Switches and dimmers
These have single, double or triple switch buttons and are usually made from metal or plastic. Switch plate finishes include chrome effect, brushed steel, nickel effect and white. Dimmer switches control the brightness of your light, either by touch, a rotating switch, or remotely through a smart phone.
Think of your OEM headlights as that suit you wore to your high school prom. That powdered blue tuxedo was cool back in the day, but it’s hardly fashion forward by today’s standards. The same is true for your car’s headlights. While most OEM lights provide adequate illumination, most times their style is straight out the 70s. Thankfully, you can pull your car’s exterior out of the past with a set of aftermarket headlights. Replacement headlights go above and beyond the uninspired design of OEM lights to enhance you car’s look and attitude. These exterior accents range from the sleek and sophisticated to the rugged and race ready, and our diverse catalog of automotive lights are sure to please drivers of all tastes.
Aftermarket headlights do more than just alter the look of your exterior – they can also enhance your car’s light output.
If your factory headlights aren’t meeting your standards, consider picking up a set of Spyder headlights. LED headlights produce a significantly stronger beam than regular OEM headlights to increase your visibility at night. Plus, they use less power than OE lights and stand up to weather and water damage better than Halogen bulbs. In addition to LED headlights, you can upgrade your front end with Euro headlights or Halo headlights. Euro lights, like Spyder Euro headlights, are ideal for import cars seeking a more continental style. Additionally, Euro beam patters are significantly wider than normal beam patterns found on factory lights, improving visibility at night and in bad weather. However, if state-of-the-art performance and style is what you want, take a look at Anzo halo headlights. Halo headlamps feature CCFL technology, which means they burn more efficiently than other lights on the market and add a super-modern style to your front end.
Sure, your tail lights’ primary responsibility is to illuminate your back-end, but they also help determine your car’s look. Unfortunately, most OEM tail lights fall short in the style department. You can bring your car’s backside looks into the 21st century with a set of replacement tail lights. From bright and bold LEDs to subtle designs inspired by European luxury, aftermarket tail lights give you the freedom to add any look to your vehicle.
Bumper Lights and Corner Lights
Bumper and corner lights are the small but essential accents that tie your car’s style together. If your car’s front-end still looks frumpy even after installing a set of new aftermarket headlights, it may have something to do with your bumper lights. In the same way a chipped tooth can ruin a perfect smile, cracked bumper lights, parking lights, and corner lights can diminish your front-end looks. Pick up a set of Anzo bumper lights to fill out your style. These bumper lights come in a variety of styles and feature a cosmopolitan design that adds sophistication to any bumper. For cars suffering from outdated corner lights, consider a set of APC Amber corner lights. These cool amber corner lights are custom designed to your vehicle, making them the easy-to-install way to brighten up the sides of your vehicle.
Helpful Tip: Need help finding the best LED headlights for your car? Take a look at the customer reviews on our site while you browse and see what people are saying about our aftermarket lights.
Third Brake Lights
Third brake LED lights take your rear-end lighting system to the next level. These lights provide drivers with an instant, cost-effective lighting upgrade, and most 3rd brake lights install easily with hand tools or automotive-grade tape. Truck and SUV owners should take a look at the Anzo LED third brake light. The Anzo 3rd brake light features a set of long-lasting LED lights and adds a rugged look to the back of your cab. It’s ideal for domestic trucks and SUVs, and comes in multiple colors. Truck owners in search of an attention grabbing light accessory should check out the Putco tail light bar. This light bar is constructed with striking LED lights that are custom fit to your truck’s tailgate. For budget conscious truck owners, this lighting accessory is a no-brainer.
How To Install Your Car Headlights
Contrary to popular belief, you don’t need a seasoned mechanic to install a set of replacement headlights. In fact, adding a new set of lamps to your car is easy, regardless of your experience with do-it-yourself projects. Check out this video and see how you can install a new pair of Spyder Euro headlights to your vehicle in under an hour.
Trucks, SUVs, and Off-road vehicles have different needs than regular automobiles. When you’re fording through dark trails or cruising through the campsite, those high-beam headlamps aren’t going to cut it. Off-road lights are designed to meet the specific needs of heavy duty vehicles and enhance the style of your exterior. They come in a variety of designs to increase your visibility and truck’s rugged look. Before you start browsing, take a look at these popular off-road lighting options to find the best set of lights for your vehicle.
If you’re facing inclement weather while off-roading, you may need additional illumination to get to your destination safely. In these situations, rely on a set of car flood lights. These flood lights have a wider beam pattern than OEM headlamps and make for a great exterior ornament for any truck or SUV. If you’re interested in mounting a set of flood lights onto your vehicle, take a look at KC HiLites off-road lights. Heavy rain and inclement weather are no match for these lights. These KC Hilities flood light kits come with impressive HID lights and feature a compact design that’s perfect for Jeeps and SUVs that are short on space.
Fog can spell major problems for drivers. Driving through heavy fog can make the straightest paths seem uncertain, and even the most experienced drivers could get lost in the haze. You can see past heavy fog, however, with a set of high powered fog lights. Car fog lights are different from flood lights in that their beam shines at a downward angle to avoid your beams reflecting off of hazy weather. Drivers who face fog on a daily basis should pick up PIAA 2000 Series Fog Lights. These compact fog lights fit most vehicles and produce a wide 55-degree light beam to increase your visibility on the road. If these lights don’t suit your style, then check out Anzo LED fog lights. The LEDs on Anzo Fog Lights add over 400 Lumens to your existing light system and are available in multiple sizes and styles. In addition to the safety they provide, fog lights can also enhance the rugged style of your truck or SUV. For drivers looking to enhance their Jeep’s style with a set of mountable fog lights, check out PIAA 520 Series fog lights. This off-road fog light kit comes with two high powered bulbs and a rugged style that provides any vehicle with a set of tough off-road lighting accents.
Long Range Off-Road Lights
Off-Road long range lights can bulk up the look of any SUV or truck. They drastically increase your visibility at night and mount onto most vehicles in minutes. If your truck is lacking in the lighting department, a long range off-road light kit might be just the thing to enhance your 4×4’s visibility. Among the many off-road range lights we carry, our most popular among off-road enthusiasts are the KC HiLites Daylighters. These powerful HID lights increase your ability to drive along dark trails and come equipped with a rugged casing that enhances your vehicle’s off-road look.
LED lights shine brighter than OEM headlights and can even triple your range of vision in some cases. Additionally, they’re built to last longer than incandescent lights. Unlike standard car lights, LEDs don’t have a filament, which makes them more resistant to water damage. LED lights also use up less battery power than incandescent lights and fire up faster than incandescent bulbs, making them ideal for brake lights. If you’re thinking about switching over to an LED light system, check out Anzo LED tail lights. These replacement tail lights give your rear-end increased visibility and make for a great off-road accent for trucks and SUVs.
Halogen is the standard bulb for most replacement headlights and tail lights. These lights burn brighter and longer than regular incandescent lights and are more energy efficient. However, like most incandescent bulbs, halogen lights are more susceptible to wear and weather damage than LED lights. If you plan on buying a pair of halogen headlights, make sure they’re encased in a weather resistant cover. Otherwise, the filament could be vulnerable to dust or water damage.
The intense glow of HID (High Intensity Discharge) Xenon lights is caused by a superheated ball of xenon gas, which burns with the same level of intensity as daylight. HID lights are typically found in off-road driving lights and flood lights. HID bulbs are ideal for drivers in search of high performance, high-efficiency lighting. If you’re thinking about adding these lights to your vehicle, check out PIAA HID lights. These driving lights only use 3watts of power and dramatically increase your visibility at night.
CCFL stands for Cold Cathode Fluorescent Lamps. These lights are sometimes referred to as “halos” for the unique, circular light pattern. Halos produce a concentrated beam of light that shines father down the road than other car lights and are ideal for cars driving at high speeds. Plus, CCFL halos give any vehicle a high-performance, high-tech style. For drivers seeking a performance halo light, check out Anzo CCFL headlights. These are car lights are custom fit to your car’s front end and install under an hour with simple hand tools.
How Weather Determines Your Automotive Lights
Use Lighting Accessories to Define your Truck or SUV’s Style
Aftermarket headlights and tail lights can help redefine your vehicle’s look and attitude. However, if those lighting upgrades aren’t enough, consider tricking out your vehicle with a set of automotive lighting accessories. We carry an exhaustive line of light accessories for trucks and SUVs, from tailgate light bars to tail light covers. If you’re looking for an additional lighting accessory for your front end, pick up a set of PUTCO Dayliners. These bright LED lights install directly underneath your truck’s headlights with 3M automotive tape and provide your vehicle with a set of attention grabbing accents that look great at any time of day.
If you’re looking for something a little bolder for your lights, consider installing a truck light bar on your truck or SUV. Truck bars do more than just provide you with additional illumination at night or in bad weather – these mountable lighting accessories embody the rugged attitude associated with off-road vehicles. SUV owners seeking a total front end upgrade should consider the KC Hilities light bar. KC Hilities has long been associated with the off-road lifestyle, and their light bar is a favorite among Jeep owners for its easy to install design and its tough, wear resistant design.
Know the lighting lingo
Know the lightbulb basics: (Quartz/Incandescent) Tungsten-Halogen – These compact light sources are filled with halogen gas, making for a longer bulb life and brighter, whiter, warmer light. Available in both line-voltage (120 volts) and low-voltage (1volts), some of the most popular halogen bulbs are:
Light Emitting Diode (LED) bulbs are the most recent addition to the residential bulb market. These lamps use 80% less energy than incandescent and last up to 50 times longer. Excellent for task lighting, night-lights, and outdoor applications, they are more expensive than most lamps, but their durability, long life, and energy-efficiency will save you money in the long run.
LED lights are much better for display cases than halogen lights for numerous reasons. The biggest factor separating these two display options is heat emission. Halogen lights use about 90% of their energy giving off heat, making them a potential fire hazard near combustible materials. With such high temperatures, halogen lights can be dangerous and cause burns if touched. An LED emits a mere 10% of their energy in heat, making them much more energy efficient and cool to the touch. This feature is particularly important if you regularly attend trade shows because many convention centers now enforce restrictions on halogen light due to safety issues and energy conservation.
Halogen lights are much cheaper to purchase, but the lifespan of an LED light is about 25-50 times longer. Longterm users of LED’s will save money on the amount of replacements that need to be purchased. Users will also save costs on power consumption. An average LED light uses watts of power, while halogen lights average about 90 watts. That’s more than 12X as much! You can also expect the cost of LED bulbs to come down as technology advances in the coming years.
Now, let’s take a look at some real-life applications. In retail, LED lights are preferred and recommended by many jewelry stores. Besides the previously mentioned benefits, LED light is more natural than halogen lighting. Customers are only disappointed when a necklace or bracelet is removed from a display case and it ends up appearing differently when in natural light. This issue can be avoided with LED light. Jewelry will be enhanced in the display, but will not be a different color or tone. LED lighting can also be directed at specific areas, while halogen light radiates in every direction, giving LED a clear advantage in showcasing merchandise.
LED lights are environmentally friendly! These lights are 100% recyclable, leaving a small carbon footprint. Not to mention over the lifespan of an LED light, you would use about 2times the materials to produce the incandescent lightbulbs. There are essentially zero UV emissions from LED lightbulbs. This also makes LED ideal for using in museums to illuminate items, such as artifacts and old documents. Don’t risk damaging a piece of history by choosing the wrong lighting!
CFL flood light
Considering all the advantages and disadvantages of CFL bulb, it becomes clear, why LEDs or Halogen bulbs are preferred type of bulbs used in a flood light fixture. Although CFL can offer decent lifetime, brightness, efficiency and are not that expensive if compared to current price of LEDs, there are some serious drawbacks for CFL usage in a flood light fixture. Firstly, CFL are pretty fragile and needs a proper casing in order to be used outdoors. Secondly, they do not reach full brightness instantly, so are not the best option to be used with a motion sensor. Thirdly, regular switching on and off can dramatically shorten the lifespan of CFL bulb. Today most of the flood lights (especially solar) used around the house have a motion sensor, so it doesn’t need to illuminate all the time, which helps to save a lot more energy and lower electricity bills. Motion sensor means that floodlight fixture will turn on and off a lot of times and this will significantly reduce the lifespan of CFL bulb. Lastly, CFL bulbs contain a toxic element Mercury. It can be dangerous, if bulb gets broken and releases the toxic element into the environment. It is also poisonous not only for environment, but also for humans.
Next, let’s see, how halogen bulbs work and what are their advantages and disadvantages compared to other bulbs.
LED flood light
Those features and advantages of LED flood lights make them the best bulb type for outdoor flood lights. First of all the efficiency of LED diodes makes them attractive option for outdoor lighting. The purpose of flood light is to illuminate a large outdoor area, and usually it requires a lot of electricity. Halogen lights are very inefficient, if you need continuous illumination every night. CFL lights are more economical, but still consume more energy than LED diodes. If you want to spend as less money as possible on electricity, the best outdoor lighting option for you are LED solar flood lights. LED and Solar in general are perfect combination, because LED diodes consume low amount of electricity and most solar panels are able to collect this amount of energy and store in flood lights battery, so it can provide electricity at night.
Durability and size of LED diode is also important factor considering their usage in outdoor flood lights. Halogen and CFL lights are fragile and can be broken quite easily. LED diodes are a lot more durable and have smaller form factor. These features are useful for outdoor flood lights, because outdoor lighting is subject to different weather conditions, including rain showers, high winds, hail, snow storms and similar. Not all flood light casings are durable enough to fully protect flood light from all impacts and it is better that fixture has durable LED diodes than more fragile CFL or Halogen bulbs.
Long lifespan of LED diode is also a huge advantage for outdoor flood lights. One thing every person who purchases a flood light wants is to never have to worry about maintenance or repairs of lighting fixture after installation, because usually flood lights are installed in high places, which are not that easy to reach. Buying and changing a light bulb of flood light once a few months for sure isn’t something you would want to do. LED diodes have lifespan from 25000 to 50000 and more hours. It means that you will not have to worry about changing a light bulb for up to and more years.
Another plus for LED diodes is that, similar to halogen bulbs, they turn on instantly without any warm-up period. This is required for motion activated flood lights. Although, LED flood lights are more expensive than halogen or CFL flood lights, they will certainly pay themselves off in few years of usage. With LED powered lights your electricity bills will get smaller and you will not have to worry about maintenance, such as changing light bulb for very long time.
Incandescent lights work by using electricity to heat up a filament inside a container with inert gas, which produces light after a certain degree. The major drawback to this is its efficiency. Only 2.2% of all energy used produces light or lumens, with the best being still a measly 5%. The rest is converted into heat, which eventually heats up its surroundings.
Halogens work almost the same, only with the addition of a halogen gas inside. The halogen gas redeposits the tungsten evaporated from heat back into the filament, extending its lifespan. This has two downsides, however. First, the tungsten generates UV light which will slowly damage any color pigments it comes in contact with. Furthermore, they are extremely hot. So hot that they are at times used in ceramic cook top stoves! As such, not only do they not increase efficiency, the added heat and UV light make these horrible home lights.
Fluorescent bulbs work by passing electric current and energizing the mercury vapor inside the tubes. The vapor then produces short-wave UV light that causes the phosphor coating to glow. They are much more efficient than Incandescent and Halogens, having a 15% efficiency at best. However, they still generate high amounts of heat (not as much as the Halogen though) and UV light.
To start if off, this LED bulb has a CRI of 80+. Sadly, however, there is no mention of Rrating. It is UL listed as well, so it has some backing.
The TIWIN A1come in only varieties, but it makes up for it on lumens. Both the 2700K and 5000K output 1100lm, and both use 1watts at max power. The high lumens make these a perfect 80w Incandescent replacement for those looking.
According to the manufacturer, these LED bulbs are not suited for full enclosures as the voltage regulator heats up a little too much. They will, however, do fine in semi-closed enclosures.
SGL Inch Downlight
Onwards we go, with this bulb having a CRI of 80+. This bulb is ENERGY STAR and UL Listed, using up to 1watts at max, making this an efficient LED.
These LED bulbs come in versions, 3000/4000/5000K, with lumens being as follows: 3000K: 1050lm, 4000K: 1080lm and 5000K: 1150lm. With their high lumens, this downlight is perfect for an 80w Incandescent replacement.
On another note, this LED bulb boasts an amazing dimmability of 100% to 1%, making it the best dimming LED bulb on this list.
This bulb is rated for enclosed fixtures as well, due to its requirement of a recessed can. While these LED bulbs are dimmable, sadly no percentage is given and as such, should be assumed to be 100-50%. Lastly, this LED light bulb is also rated for outdoor use, making this appealing to those wanting a recessed patio bulb.
Coming with a choice of glows, the 2700K outputs: 630lm, 3000K outputs 650 and the 4000K outputs 670. Every glow also consumes the same wattage, 14w.
As such, they are on the dimmer side in terms of lumens, mostly due to the smaller size and increased attention to CRI. Overall, however, these are an amazing replacement for 60 watt Incandescent bulbs, but will fall behind as 80 and 100-watt bulb replacements.
LOHAS Torpedo LED
As one of the smallest LED bulb around, the LOHAS Torpedo LEDs fall shorter on the spec side. However, these still manage a CRI>80, making them on par with others here on this list. And due to their size, take the least around of watts, maxing out at watts on 100% brightness. Sadly, however, these are not UL-listed, so keep this in mind.
In terms of lumens, the LOHAS fall under with the 2700/4000/5000K all outputting 550lm. As such, these LED bulbs are best used to replace a 40-watt Incandescent, not a 60 watt as advertised. However, due to its design, this LED is marketed as a 360° bulb. As such, when placed in certain fixtures, they may seem brighter than one might expect.
Something that must be noted, is some of the design issues. People have reported issues with the base not fitting all the way and thus making these LED bulbs worthless to them. This is because the base is on the shorter side, making the bulb not fit in every socket.
LEDMO LED Candelabra
Like the LOHAS, these bulbs fall shorter than others. But they are on level fields, with a CRI>80 just like the others. They do, however, take an extra watt on the way, maxing out at watts. These LED bulbs are not UL-listed nor Energy Star
On the lumens side, these are brighter than the LOHAS, with the 3000K and 6000K both outputting 630lm. Unlike the LOHAS however these only have a 270° beam angle, and as such, cover less area compared to the other.
Tube LED Bulbs
A quick note: *most these require ballast bypass as per instructions given by HYPERIKON.
To start it off, these tube LEDs boast a CRI of 84, making them better than most other tubes. Though they are one of the most power intensive, drawing in 1watts. This LED bulb is not ENERGY STAR qualified, but it is DLC qualified. As such, it still is an efficient bulb and has some credibility.
Something to note though: all of these LED tubes are clear, so they
There is some similarity spec wise between this set of LED tubes, and the ones above. And as such, this tube draws 1watts. The lumens are the same all across the glows, with 3000/4000/5000/6000K all outputting 2200lm, just like the double ended. Lastly, this bulb also comes in at a CRI of 84, so this choice is mostly out of which works on your fixture.
First of all thanks for reading my article to the end! I hope you find my reviews listed here useful and that it allows you to make a proper comparison of what is best to fit your needs and budget. Don’t be afraid to try more than one product if your first pick doesn’t do the trick.
Most important, have fun and choose your Halogen Bulbs wisely! Good luck!
So, TOP3 of Halogen Bulbs
- №1 — (Pack Of 10) MR16 20W 12V GU5.3 Base Halogen bulb Flood 2000Hr Life 2950K Warm White MR16 Halogen Light Bulb
- №2 — G4 Halogen Light Bulbs, 20W Bin-Pin(2pin)12 Volts JC Type,Clear bulb(Pack of 10)
- №3 — Triangle Bulbs T10293-6 (6 pack) – 50 Watt, GU10 Base, 120 Volt, MR16 With UV Glass Cover, Halogen Flood Light Bulb, Q50MR16/FL/GU10, 6 Pack