Welcome to Buyer’s Guide!
Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.
Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.
Check Today Price
Top Of The Best Candle Lamps Reviewed In 2018Last Updated March 1, 2019
№1 – Firefly Zen Petite Reusable & Refillable Aromatherapy Oil Candle. Votive Size. Burns 12+ Hours. Use with…
№2 – LED Chandelier Bulb 4 Pack E12 Decorative Candle 40W Equivalentis Design To Fit Candelabra Lamps In Nightlights, Chandeliers, 2-year Warranty (4000k Neutral White)
№3 – Brass Plated Candle Lamp with On/Off Sensor – Pack of 6
The most recognisable type of bulb, and the easiest to replace. Let’s say you have a standard 60W incandescent bulb which you use to light your lounge and replace it with a 12W Verbatim LED bulb. This is overkill, if anything, as the replacement will be noticeably brighter (producing 1,100 lumens – the equivalent of a 77W incandescent bulb and representing 8percent energy saving).
Using some average figures – 15p per kWh of electricity – you’ll save around £per year.
They’re said to last for 25,000 hours – the same as the Verbatim – and you’ll break even in roughly two years.
There are various types of incandescent bulb. The common version – in the photo above – is an E2screw, but it can also have a traditional bayonet fitting. Most LED bulbs offer a choice of either fitting.
You may also have R50 spotlight bulbs (also known as SES or E14) in ceiling light fittings. These are fairly widely available as LED versions.
However, using the same SES / E1screw fitting are many ‘candle’ bulbs. Again, these are easily available in LED.
All of these are inefficient and can be replaced with LEDs. Halogen spotlights are perhaps the worst culprits as although they use less power than incandescent bulbs, they’re rarely used singly. Typically there will be up to six or eight per room, and if each is a 35W lamp, that’s between 200 and 300W. Halogens are notoriously inefficient, such that you can buy ‘energy-efficient’ halogen bulbs, but even these save only around a third.
Halogens come in two main types: GU(mains voltage) and MR1(low voltage – 12V). Just because some are low voltage doesn’t mean they use less power. They don’t.
Don’t forget your outdoor lighting. Halogen floodlights – which have lamps which consume between 120 and 500 watts – can be replaced with 10- or 20W LED versions for around £to £20 per light: you replace the entire light fitting. This 10W model costs only £9.9from Toolstation.
Colour temperature is crucial: most people prefer the warm white, which is very similar to halogen, rather than the ‘cold’ bluish tint of white or cool-white LEDs. Look out for the actual colour temperature in Kelvin: 2700-3000K is a good warm white. Higher values, say 5000K or 6000K will look cooler. If you want a whiter look, be careful as you can end up with a very clinical look.
You also need to look at brightness, measured in lumens. Try to find out how many lumens your current halogen lamps produce, and match or exceed that. Some cheap LED bulbs produce as little as 120lm, but you’ll probably find you need 350-400lm to provide the same light output as your existing bulbs.
Next up is beam angle. This determines the spread of light the bulb produces. A narrower angle means light will be concentrated on a smaller area, like a spotlight. A larger angle is better for lighting a larger area, but don’t forget this means it could appear dimmer overall. For replacing Halogen downlights, look for a beam angle of around 40 degrees. Incadescent replacements should have a much larger beam angle, say 140 degrees.
CRI is another spec you should see (if you don’t, it’s worth asking for the CRI figure). Here’s why: CRI stands for Colour Rendering Index and is a measure of the light quality from 0 to 100. In other words, the CRI score tells you if objects appear the correct colour when lit using that bulb. Incandescent bulbs had a brilliant CRI, but not so with fluorescent tubes. If you want to avoid bad-looking lighting, it’s crucial to go for LEDs with a high CRI.
Not all LEDs use the same technology. Cheaper bulbs will tend to use multiple SMD (surface-mount device) LEDs, but newer or more expensive ones will use COB – chip on-board LEDs.
COB offers a higher light output per watt, and tends to be used in smaller bulbs such as MR1COB isn’t necessarily better than SMD, though. It depends on the form factor of the bulbs you’re buying and your priorities in terms of budget.
If you are replacing low-voltage halogen bulbs, there are no guarantees that LEDs will work on your particular transformers which may require a minimum power draw to work properly. If the draw is too low from your super-efficient LED bulbs, they may flicker or not work at all. In this case, you would need to either replace the transformers with proper LED drivers, or change the fittings from MR1to mains-voltage GUfittings and buy GULED bulbs instead. Fittings are cheap, and it may be cheaper to go down this route than buy an LED driver for each MR1bulb.
The most common and oldest man-made type of candle wax, it offers a really good scent throw. With a high melting point it has a good stability as it burns, but if burnt frequently you may notice black soot marks on the inside of a glass candle holder.
Soy is a vegetable and a renewable source; it burns cleanly with no toxins and little to no soot. Soy candles burn longer and cooler than their paraffin counterparts, and have an excellent scent throw. Wax spills can be cleaned up by simply using warm water and soap.
Consisting of reed sticks and an oil and alcohol solution, diffusers deliver a constant fragrance that’s perfect for greeting you when you come home. They’re ideal for the summer months as they produce no heat but warmth helps increase the fragrance intensity; just keep them out of reach of children and pets.
Pillar candles are a more discreet theatrical candle light that creates atmospheric light in churches, outdoors and inside your home. From a choice of 4cm, 5cm and 5cm with timer the massive collection of battery powered LED pillar candles can suit every venue. In a variety of colours, there’s definitely a colour for your mood or grab colour changing to enjoy them all.
The dancing flame collection brings cream LED pillar candles to life. With the flickering flame, mid melt wax finish and a wax coating, these candle are almost real. Compatible with a timer, set the candles to be flickering away when you arrive home.
We always have out of the ordinary items that widen eyes at their fashionable uniqueness that makes them the must-have item this season.
These floating LED tealights follow trend, bringing a spectacular candle light above water. Wonder how they work? That’s easy. With metal activation points on every tealight base, once they touch water, the LED light activates and your candles are lit.
These floating lights are a feature on their own and would make the ultimate table centre at weddings, anniversaries, and seasonal parties. Grab a fancy bowl, fill with water and allow the battery-operated tea lights to bring the centre piece to life.
We don’t stop at the water surface, we go underneath it too. Categorised under tealights, our submersible lights wont have the candle wick nor tealight shape. They do, however, bring a bright light in their small size.
Available in the original colours, white, amber and colour changing; these lights will bring a mesmerising show. Illuminating any under water feature you desire, their fully waterproof design allows them to sit under water all battery life. Set in manor house fountains at weddings or drop in water features at festivals and in your garden. You could even make the punch bowl glow too!
The traditional tapered pillar light is one seen still today, filling candelabras with a regal look. From ceilings, tables to floors, taper candles and their holders are set in and about the house in any place we can find.
Discover these multiple sets of stick candles, readily available is sets of and With some sets including a remote, ignite the battery operated tapers with ease.
Bring a realism of candle light with the wax finished taper church candles. Completing the look with a dripping wax affect, the illusion of burning flame candles will complete the room. Glowing LED amber light in churches, special venues or during festivals, the tall flameless candles can bring a warming happy atmosphere.
Consider our exclusive SafeFlame Battery Candles
These handheld battery candles have a realistic LED light that flickers like a real flame. Creates an amazing effect for your candlelight vigil services. A kid-friendly and flameless alternative for your church service or event.
Here’s an example:
Let’s say you have a large room over 16′ x 20′ with 10′ ceilings. This spacious room is best suited for a larger scale table lamp, likely above 30″ high.
Smaller spaces, such as a den or lower-ceiling rec-rooms are better with conventional table lamps – usually 20-26″ high.
DRESSER LAMP TIP
Dresser lamp choices are made best with the dresser’s height in mind. Tall tables (greater than three feet) should have lamps no higher than 24”. This concept is to accommodate the practical use of the lamp, the aesthetic proportion, and the balance of a fragile item that’s up high.
Put your best foot forward. Table lamps for office should match the aesthetic, and the most impressive should be the first (and most often) seen by clients and customers.
For the complete picture on office lighting that helps you work, check out our comprehensive blog post on TASK LIGHTING.
If you already have a lamp base without a shade
Fret not, we have a guide for that too, where you can actually figure out the exact right size of lamp shade you need based on the size and shape/style of your lamp base. Consult the section of our lamp shade buyer’s guide regarding how to measure a lamp shade for tips on what size shade you’ll need depending on your lamp base size.
Once you have an idea of the size you may need, consider the shape of the lamp base to help you decide what kind of lamp shade to look for. See our section on How to match the shade shape to the lamp base for simple tips about matching the lamp shade shape to the style of the base. While it may be easy to just throw a typical empire shade onto your lamp, it will look better when the shape of the lampshade complements or balances or brings out the shape of the base.
It’s recommended to read the full lamp shade buyers guide.
QUALITY MATTERS – as usual, you get what you pay for…
Your home can benefit from the table lamp that is exquisitely made with the finest materials and craftsmanship. Thus, look for high-quality lamps that can offer you functionality and beauty, plus a long life.
When you bear in mind the factors mentioned above, you will surely have better chances of ending up with a lamp that serves the purpose and provides more benefits both for you and your home.
Make home your sanctuary with our elegant scented candles. Housed in our signature coloured glass and blended in England, they instantly create a warm glow and fill the space with your favourite fragrance.
Whether you need to relax, energise or just need a finishing touch for a dinner party, choose from three sizes and a wide selection of blends to set the tone.
For the ultimate fragranced experience, place the candle in a central part of the room to allow the scent to distribute evenly.
Choose a flat heat resistant surface to avoid accidents.
Trim the wick to about 5mm before lighting to avoid enlarged flame and sooting and maximise the burn time.
The first burn is the most important. Allow the wax to melt across the entire surface before extinguishing the flame to prevent ‘tunnelling’.
Spray liberally into the air and on linen to imbue your home with the world’s finest aromas.
When spraying linen, hold 20cm away and only on washable fabric.
Ardent travellers, mist your suitcase before packing for beautifully scented clothes when you arrive at your destination.
Place the reeds in the bottle and leave them for a minute to absorb the oils.
Invert the reeds to place the ‘dry’ ends in the bottle so that the saturated end is exposed.
Allow 2hours for the fragrance to fill the room or invert the reeds every few hours to speed up the process.
Pair your chosen scented candle or aroma reed diffuser with the matching Home & Linen Mist or create a
ZERO Animal Products!
Most relevant for vegan candle lovers, soy candles provide all the scent and warmth, without the use of any animal ingredients. While beeswax is a highly contested ingredient in the vegan community, very strict vegans tend to avoid it as procuring beeswax can disrupt a bee colony or cause harm to individual bees, even though the wax itself is not an animal ingredient.
With so many options for plant-based wax, including soy, the potential disruption to the bees is unnecessary, so very strict vegans (and those who simply are avoiding bee products) have plant-based waxes to choose from.
Plant-based and Natural
In addition to being vegan-friendly, soy wax is a green choice for homemade candles.
Soy wax is made from soybeans, a natural, renewable, and biodegradable crop grown in many regions by local farmers. Other wax options like paraffin are made from petroleum, a material that may contain carcinogens that might be released into the air during burn time.
A greener choice for the environment, purchasing soy wax is also supporting agriculture and farmers, instead of providing funds to producers of non-renewables.
Soy Candles Last Longer
When you pour the time and effort into making candles at home, you want to be sure they’ll last long enough to be worth the work. Choosing a soy wax means you won’t burn through your candles as quickly, as soy candles burn cooler and therefore generally last 30-50% longer than a paraffin candle.
Number of Candles
How many candles are you hoping to make from a single kit?
If you’re looking to have a rainy day activity on hand to do with your children, you’ll probably need fewer candles – and therefore fewer materials – than if you’re searching for a kit that will allow you to make lots of candles.
Remember that making more candles requires more ingredients and materials, so a kit that allows you to make many candles instead of reusing a few tins will cost considerably more than one that covers just the basics.
However, if you’re hoping to make lots of candles with your kit, purchasing one that includes enough for a large volume will ensure that you don’t run out of materials mid-project, and you can save yourself the hassle and downtime of buying more materials “a la carte.”
The color of a candle can complement the decor of a room, or give a hint about the scent of the candle – a red candle might signify apple, while a yellow candle is perfect for a bright lemon fragrance.
Like fragrance, most kits come with a sampling of many different colors. If you require a certain color, you may be able to make a special request to the makers of the kits or opt for a kit that includes a single color in it.
Philips makes a wide number of smart LED lights that offer a mix of colors and effects that you can control remotely. Plus, LEDs last much longer than other types of lights, and consume less energy, too. Philips Hue lights also integrate with
Bulbs and Lightstrips
You can expand your lighting options through a number of different Philips Hue bulbs. These include everything from plain white bulbs to multicolored lightstrips and other bulbs that fit smaller sockets. Just remember you’ll have to connect them to your bridge first.
While limited to a few options, Philips light fixtures have the bulbs built directly into them. That means that when the LEDs burn out—which should be at least years, if not more—you’ll have to replace the entire fixture. These also require a bridge (sold separately) to control them via Philips’ app.
Automatic Sensor Dusk To Dawn Electric Candle Lamps
Gallery of Light Moroccan Lantern Blue Glass Candle Holder Candleholder
Creative Hobbies Electric Window Candle Lamp with Brass Plated Base, On/off Switch, Light Bulb, Ready to Use!
Brass Plated Candle Lamp with On/Off Sensor – Pack of 6
UCO Original Candle Lantern Value Pack with Candles and Storage Bag
After spending over 60 hours researching Christmas lights, interviewing experts, and testing 20 strands of lights side by side, we’ve found that GE’s Energy Smart Colorite LED Miniature Lights (available in multicolor strands of 50 bulbs or 100 bulbs and in warm white strands of 50 bulbs or 100 bulbs) are the best all-around indoor Christmas lights. This is the third year we’ve named these GE lights as our pick, and we can’t find any lights that match their color quality and their ready availability at Home Depot.
We’re working on an update for the holiday season, and we plan to add our thoughts on smartphone-app light sets such as Home Depot’s AppLights. For now, we’re confident that our current picks, all of which are currently in stock, remain the best lights for most people.
How we picked and tested
We concentrated our research and testing strictly on nonblinking miniature lights, the traditional, small, stranded Christmas lights with a clear or semiclear bulb and a candle shape.
An article at DIY Network says that even though larger bulbs are growing in popularity, “mini lights have been by far the most popular during the past decade.” They’re the standard, and we wanted to focus on the lights that most people will be using, rather than those with a lesser following. Still, we do have some thoughts on the larger-bulb lights, and on other bulb sizes that didn’t make the cut. During our research, we also found that blinking lights are a very small minority of available lights, so we stayed with the type that remains lit at all times.
Once we dug into our options, we soon realized that our recommended lights would be fully rectified LEDs and not traditional incandescents. As Northern Seasonal’s Ben Orr, the lighting installer, told us, “LED lights allow you to do more with less.” They’re more durable, they’re safer, and you can connect together a much higher number of strands without any risk of tripping a breaker or a GFCI outlet. They also just plain ol’ last longer and use a fraction of the electricity that incandescents use.
In an article on the Christmas Designers website, Jason Woodward writes that “the benefits offered by LEDs are almost as significant as the benefits that incandescents provided over candles.” There’s no question that LEDs cost more than incandescents (they’re at least twice the price), but we believe that the long-term benefits are worth that added cost.
Some LEDs are better than others, however. All LED Christmas lights blink on and off many times per second, like a fluorescent light. The ones that are fully rectified, or full-wave, light up at a rate of 120 times per second, which is faster than the eye can detect. Lights that are known as half-wave, sometimes called non-rectified, blink 60 times per second, which can create a dizzying flickering effect. Orr told us that when a non-rectified strand is moving, the flickering becomes more apparent, and we confirmed this effect during our testing: Just by giving a non-rectified strand a slight jiggle, we made the lights take on a strobe effect that was very unpleasant to look at. In our tests, even when they were not moving, those lights seemed to have a harshness, an electronic feel, that the rectified lights didn’t have.
For outdoor lights, our experts directed us toward a specific style of LED, 5-millimeter wide-angle conicals. The bulbs on these lights are stubby and don’t have the homespun look of the small glass candle found on other mini lights. They are much brighter than regular mini lights (both LED and incandescent), and the unique shape of the bulb adds depth and complexity to the lights’ appearance. As Orr told us, this shape allows the strand to “refract the light and create a cool look depending on the angle of view. It appears that some are brighter than others and it adds contrast.” Orr, who specializes in exterior displays, added that mm wide-angle lights are generally his favorite light. And Christmas Designers, in a video dedicated to the bulbs, says these lights are “by far the most popular set we sell.”
But as with regular LED bulbs, the color of the light is a concern. We figure that if you’re reading this guide, you’re probably interested in replacing an old set of incandescent lights—but even if you want something more efficient and durable, you don’t want to give up the traditional lights’ familiar warm glow. Unfortunately, that is a big issue with LEDs.
Both Orr and Woodward warned us that LEDs simply do not look like incandescents. Due to improvements in the technology, many companies manufacture a “warm white” color that, depending on the quality of the LED, can closely mimic, but not fully achieve, the pinpoint sparkle of an incandescent. Orr stressed that “LED technology varies throughout the industry, and a warm white from one supplier can vary in hues and color drastically from another.” He even suggested buying strands from a few different manufacturers to compare them and see which hue you like best before making a large purchase. Once you find something you like, he said, buy from only that manufacturer. Our testing confirmed that there is a tremendous variety in LED color hues, from the fantastic to the terrible.
We dismissed companies that had overall poor reviews (Holiday Time), strange or incomplete bulb selections (EcoSmart), or suspiciously low pricing (Home Accents). Other companies, like Hometown Evolution, AGPtek, and Deneve, fall more into general exterior decor and don’t have a very good selection of Christmas lights. AGPtek, in particular, deals only in solar-powered or battery lights, which are more of a specialty item, and we wanted to concentrate on general tree and exterior lighting.
Our original testing consisted of 1sets, including colored and white mini lights, both LED and incandescent. We also tested a number of mm wide-angle conical LEDs, since our experts recommended them for exterior use. Then, in 2015, we looked at two new sets from Christmas Designers, the TSmooth LED Lights in both warm white and multicolor.
Ready to begin testing.
To evaluate the lights, we wound and unwound them, draped them over and into Christmas trees and rhododendrons, and tucked them in and out of deck railings. Basically, we tried to use the lights how they’re intended to be used. We tested the weather impermeability of the exterior lights by plugging them in and sinking the strands of lights into a 3-gallon bucket of water. While this test was a bit extreme, it’s certainly possible that any set of exterior lights will end up in a puddle or draped in a gutter.
Overall, we found that the wire quality has a lot to do with the success of a strand of lights. Some of the tested lights had tidy, close-knit strands of wire, while others were loose and messy. Some wires needed untwisting before use, like an old phone cord, and still others continued to accordion back on themselves no matter how we tried to stretch them out and lay them flat.
We also assessed each strand for color quality, using the incandescent strands as a benchmark, with the input of Susan Moriarty, executive creative director and founder of The Soapbox Studio. She’s a die-hard fan of the warmth that incandescent Christmas lights emit, so we asked her to compare the classics against new LEDs. Even though Moriarty did her evaluations in a blind fashion, she consistently chose along brand lines, a result that backed up Orr’s suggestion to select a single manufacturer and stick with it.
Long-term test notes
After two seasons of having the GE Energy Smart Colorite LED Miniature Lights on my tree, I have no complaints. Just recently (fall 2016) I took them out of storage for the holidays, and all of the bulbs work fine. I’ve noticed that the wire stranding has loosened a little, but the lights are still fairly well organized, and I don’t foresee any issues with putting them around a tree.
GKI/Bethlehem’s LEDs are nice lights, but we found that their color and wire quality didn’t match that of the GE or Christmas Designers lights.
The multicolor LED lights sold by Noma (known as Holiday Wonderland in the US) had a nice hue in our tests, but they’re non-rectified, so they have the potential for flicker—and if you merely jiggle them, they produce a dizzying strobe effect.
We also tested Noma’s mm wide-angle multicolored LEDs. Like the other Noma lights, this set is non-rectified. And because these lights employ a two-piece bulb and socket design, there is a chance of water infiltration, making them less than ideal for exterior applications.
GKI/Bethlehem’s wide-angle LEDs had a tidy wire but lacked the color quality of the wide-angle LEDs from the specialty stores. The whites had a far whiter hue. Even though this strand is sold as a warm white, in our tests The Soapbox Studio’s Susan Moriarty didn’t see a whole lot of warmth to it.
Wide-angle conical lights from Christmas Designers (top) and Christmas Light Source (bottom). Notice what a disaster the wiring is on the CLS lights. The best of the tested lights had nice, organized wires like the ones from Christmas Designers.
The wide-angle LEDs from Christmas Light Source had the most frustrating wire of all the lights we tested. Each bulb needed twisting and turning for the strand to lie flat, and even then it kept trying to spring back to how it was. The individual wires were loose from one another and had uneven loops. It was a nightmare to feed them through a tight spot like a railing or even between two branches.
The Brite Star clear incandescents we tested were very nice, and in light quality they were on a par with the strands from Christmas Designers and GE. We didn’t make them a recommendation because they have a 2½-inch spacing, which seems a little tight for most people. As we mention above, inches is the standard.
While the Brite Star incandescents were a success in our tests, the company’s LED Mini Ice Lights were a total failure. Everything bad about LEDs was on display with these lights. When we plugged them in, the result was like having 50 small computer screens lit up on a wire strand. It was just awful. They’re non-rectified, and the effect is not a positive one. The light that these LEDs emit is about as natural as the ingredients list on a Twinkie.
Cluster lights offer a unique and hazy look, but because they have so many bulbs per strand, they quickly get expensive.
In 2016, we tested two different styles of cluster lights. Such strands, which have been popular in Europe for years, have much smaller bulbs (either mm or mm conicals) and a vastly higher bulb density—a 10-foot strand has almost 450 bulbs on it, in contrast to traditional mini lights, which might have only 50 bulbs on a 16-foot strand. With regular mini lights, the bulb is attached to the main wire, but on a cluster strand, the bulb sits on the end of a 2½-inch extension coming off the main wire. The spacing on these extensions can be as little as ⅛ inch. On a tree, cluster lights offer a hazy, almost fairy-tale effect.
We found them available in two styles: straight strands and tree ready. The straight strands are self-explanatory, but the tree style is a little more complicated. This design—consisting of a central (non-lit) wire with a series of cluster strands coming off it, each one longer than the last—allows you to hang the main line vertically from the top of the tree (with the shortest cluster at the top) and then unravel each cluster around the tree. Lighting a tree this way takes hardly any time at all (this video shows the process). The lights are available for either 6-foot or 6.75-foot trees in warm or cool white.
If you are interested in cluster lights, we recommend sticking with a trusted retailer due to the variances we’ve seen with LED light quality. The ones we tested were from Christmas Designers, and these bulbs have the same warm incandescent-like look as the company’s other LED products.
First of all thanks for reading my article to the end! I hope you find my reviews listed here useful and that it allows you to make a proper comparison of what is best to fit your needs and budget. Don’t be afraid to try more than one product if your first pick doesn’t do the trick.
Most important, have fun and choose your Candle Lamps wisely! Good luck!
So, TOP3 of Candle Lamps
- №1 — Firefly Zen Petite Reusable & Refillable Aromatherapy Oil Candle. Votive Size. Burns 12+ Hours. Use with…
- №2 — LED Chandelier Bulb 4 Pack E12 Decorative Candle 40W Equivalentis Design To Fit Candelabra Lamps In Nightlights, Chandeliers, 2-year Warranty (4000k Neutral White)
- №3 — Brass Plated Candle Lamp with On/Off Sensor – Pack of 6